ints:stone_carving

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
ints:stone_carving [2025/12/03 17:17] daveints:stone_carving [2025/12/17 04:30] (current) – external edit 127.0.0.1
Line 68: Line 68:
 <figure> <figure>
 {{url>https://www.youtube.com/embed/FBCHa4t8eYk 560,315}} {{url>https://www.youtube.com/embed/FBCHa4t8eYk 560,315}}
-<caption>  
-_Introduction to stone carving tools and techniques._ 
-</caption> 
 </figure> </figure>
 </WRAP> </WRAP>
  
 +_Introduction to stone carving tools and techniques._
  
 The amount of detail depends on the stone – it’s difficult to get much detail with granite, for example, but in marble, Italian Renaissance sculptors were able to capture intricate details. The amount of detail depends on the stone – it’s difficult to get much detail with granite, for example, but in marble, Italian Renaissance sculptors were able to capture intricate details.
Line 119: Line 116:
 <figure> <figure>
 {{url>https://www.youtube.com/embed/3Rst9tyF2Ps 560,315}} {{url>https://www.youtube.com/embed/3Rst9tyF2Ps 560,315}}
-<caption>  
-_The philosophy and practice of making letters in stone – part 1._ 
-</caption> 
 </figure> </figure>
 </WRAP> </WRAP>
  
 +_The philosophy and practice of making letters in stone – part 1._
  
 To sell your work, you’ll need to exhibit. There is a demand for smaller pieces, which may take a couple of hours and can fetch £50 or so. This may be a reasonably worthwhile sideline at first, as you could sell several per year. For larger pieces (for example, for hospital foyers, housing developments or parks), commissions are listed on the website of the [Royal Society of Sculptors](https://sculptors.org.uk/) - but it’s difficult to make a living from sculpture unless you make a name for yourself. To sell your work, you’ll need to exhibit. There is a demand for smaller pieces, which may take a couple of hours and can fetch £50 or so. This may be a reasonably worthwhile sideline at first, as you could sell several per year. For larger pieces (for example, for hospital foyers, housing developments or parks), commissions are listed on the website of the [Royal Society of Sculptors](https://sculptors.org.uk/) - but it’s difficult to make a living from sculpture unless you make a name for yourself.
Line 162: Line 156:
 <figure> <figure>
 {{url>https://www.youtube.com/embed/qAnIugMviQ4?ecver=1 500,300}} {{url>https://www.youtube.com/embed/qAnIugMviQ4?ecver=1 500,300}}
-<caption>  
-_The philosophy and practice of making letters in stone – part 2._ 
-</caption> 
 </figure> </figure>
 </WRAP> </WRAP>
  
 +_The philosophy and practice of making letters in stone – part 2._
  
 ### Health & safety ### Health & safety
Line 203: Line 195:
  
 After the chisels, switch to old bits of carborundum (silicon carbide) grinding wheels, rubbing the stones to smooth down areas even more. Use different grades, from coarse to smooth, to finish the shaping. Then use different grades of sandpaper, and finally, depending on the finish you want, wet and dry paper. 200 grade will give you a finish that is smooth but not shiny, or 2000+ grade will give you a very smooth, polished surface if required. You can polish granite or marble, but sandstones are too gritty for a very smooth surface. After the chisels, switch to old bits of carborundum (silicon carbide) grinding wheels, rubbing the stones to smooth down areas even more. Use different grades, from coarse to smooth, to finish the shaping. Then use different grades of sandpaper, and finally, depending on the finish you want, wet and dry paper. 200 grade will give you a finish that is smooth but not shiny, or 2000+ grade will give you a very smooth, polished surface if required. You can polish granite or marble, but sandstones are too gritty for a very smooth surface.
- 
- 
-## Further resources 
- 
  
  
Line 212: Line 200:
  
 [[p:Kevin Blockley]]  [[p:Kevin Blockley]] 
- 
  • ints/stone_carving.1764782244.txt.gz
  • Last modified: 2025/12/03 17:17
  • by dave