Differences

This shows you the differences between two versions of the page.

--- ints:natural_soaps [2025/11/29 09:40] – created asimong
+++ ints:natural_soaps [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-# Natural soaps
-![](https://lowimpactorg.onyx-sites.io/wp-content/uploads/nat-soaps-main1.jpg)
----
-> "Soapmaking is like cooking - just don't lick the spoon.' - anon
-## What are natural soaps?
-They are soaps without the added preservatives, parabens, surfactants and other assorted nasties commonly found in the commercial soaps sold in supermarkets (where of course, we'd urge you [not to shop](http://lowimpactorg.onyx-sites.io/lowimpact-topic/low-impact-shopping/)), apart from the lye (sodium hydroxide or caustic soda) that is necessary in the soap-making process. Natural soaps are made largely from various plant oils, although animal fats can be used too.
-<WRAP center centeralign>
-<figure>
-![soaps-dish](https://lowimpactorg.onyx-sites.io/wp-content/uploads/soaps-dish.jpg)
-<caption>
-Hand-made natural soap bar on a hand-made wooden soap dish.
-</caption>
-</figure>
-</WRAP>
-**The chemistry of soap**
-Saponification is the chemical reaction involved in making soap. An acid (the oil or fat) reacts with an alkali, or base (the lye) to form a salt (the soap - not table salt, but a chemical salt nonetheless). Soap works in two ways. First, soap molecules are long chains with a water-loving end and a water-repelling end. The water-repelling ends push up through the surface of water droplets (to try and get away from the water), and the combined effect of millions of soap molecules pushing through the water's surface is to break the usual surface tension of water and allow it to spread, and 'wet' the objects to be cleaned more. Secondly, the water-repelling ends of the molecules attract dirt, and the water-loving end pulls the molecule into suspension in water. After rinsing, the soap molecules and the dirt are washed away.
-<WRAP center centeralign>
-<figure>
-{{url>https://www.youtube.com/embed/aKLrSK0DuYk 560,315}}
-<caption>
-_Hot process soap making tutorial from our [Make your own Natural Soaps online course](http://lowimpactorg.onyx-sites.io/natural-soaps-course/)._
-</caption>
-</figure>
-</WRAP>
-**The soap-making process**
-The simplest process is re-batching, or 'melt & pour'. A basic soap base is melted down, and ingredients are added to give scent and colour. This is actually personalising soap rather than making it. There are two main processes for really making soap:
-- Cold process: the only heat required is to initially melt any hard oils. The reaction itself generates its own heat, and takes up to 48 hours.
-- Hot process: the ingredients and methods are the same as for the cold process, but external heat is used to complete saponification - e.g. using a slow cooker for a few hours.
-Liquid soaps are made in a similar way to the hot process, but with potassium hydroxide instead of sodium hydroxide (as it has a 'looser' molecular structure, and therefore produces a liquid, rather than a solid soap).
-Various botanicals (plants / herbs) and essential oils can be added for different fragrances and properties.
-<WRAP center centeralign box 50%>
-<figure>
-![soaps-ingredients](https://lowimpactorg.onyx-sites.io/wp-content/uploads/soaps-ingredients.jpg)
-<caption>
-A range of natural ingredients for soaps, including lemongrass, shea butter, satsuma peel, cinnamon sticks, calendula petals, lavender, star anise, beeswax, oatmeal, nutmeg, cocoa butter and eucalyptus leaves.
-</caption>
-</figure>
-</WRAP>
-**History**
-,500-year-old Mesopotamian clay tablets have been found describing the use of soap with textiles, and through the ages there have been lots of different recipes for soaps using fats and alkalis. Prior to the use of modern chemicals however, wood ash was used as the alkali rather than lye - but because the composition of wood ash isn't standard, the results would have been very unpredictable. Recipes could easily have produced soaps that were too caustic or not caustic enough, resulting in damage to skin, or rancid soaps. In the Middle Ages, Castille soap (made from olive oil) spread from Spain and began to replace the old wood ash / animal fat soaps. Synthetic detergent bars arrived in the 20th century, and now there is a trend away from synthetics towards natural, traditional soaps - a trend we enthusiastically support.
-<WRAP center centeralign box 50%>
-<figure>
-![soaps-finished](https://lowimpactorg.onyx-sites.io/wp-content/uploads/soaps-finished.jpeg)
-<caption>
-Finished soap bars.
-</caption>
-</figure>
-</WRAP>
-## What are the benefits of natural soaps?
-**Benefits for your skin**
-You know that you're putting natural, gentle, moisturising materials on your skin. Commercial soaps tend to contain products from the petrochemical industry (which strip your skin of its natural oils), propylene glycol instead of real glycerine, and other synthetic agents that cause the excessive foaming that manufacturers try to persuade us is a good thing via TV advertising. Typical commercial soaps also include a range of chemicals from [Triclosan](http://www.ewg.org/skindeep/ingredient/706623/TRICLOSAN/) and [diethanolamine](http://www.ewg.org/skindeep/ingredient/718373/DIETHANOLAMINE/) to [sodium laureth sulphate](http://www.ewg.org/skindeep/ingredient/706089/SODIUM_LAURETH_SULFATE/) that can potentially cause damage to the immune system, disrupt the endocrine system and impair fertility. Avoid.
-Different oils, botanicals and essential oils have different properties. For example, castor oil is good for the scalp; cedarwood essential oil is good for oily skin; and benzoin essential oil is good for sensitive skin. You can tailor your soap for the properties you want.
-<WRAP center centeralign box 50%>
-<figure>
-![soaps-pouring](https://lowimpactorg.onyx-sites.io/wp-content/uploads/soaps-pouring.jpg)
-<caption>
-Pouring soap mix into a mould.
-</caption>
-</figure>
-</WRAP>
-**Environmental benefits**
-If you make your own soap, you can include home-grown, organic ingredients that require no transport, and you don't need any packaging. You can refill existing bottles with liquid soaps or shampoos, or make shampoo bars.
-You can also leave out the [palm oil](http://lowimpactorg.onyx-sites.io/why-some-soap-makers-refuse-to-use-palm-oil-and-how-you-can-help-them/). Almost all commercial soap contains palm oil, from plantations that require massive tropical deforestation and / or a change of land use away from vital food crops (sometimes even if the packaging says that it's from sustainable sources).
-The cold process is more environmentally-friendly than the hot process, as heat (and therefore energy) input is not required.
-<WRAP center centeralign box 50%>
-<figure>
-![soaps-liquid](https://lowimpactorg.onyx-sites.io/wp-content/uploads/soaps-liquid.jpg)
-<caption>
-Hand-made liquid soaps.
-</caption>
-</figure>
-</WRAP>
-## What can I do?
-Make sure that you only buy natural soaps, or you can learn to make your own. First, learn as much as you can. Here’s our [free online course](http://lowimpactorg.onyx-sites.io/natural-soaps-course/) on all aspects of making your own natural soaps.
-You can buy or make soaps for washing your body, hair, laundry, floors or pets. Plus some soaps can be used for [shaving](http://lowimpactorg.onyx-sites.io/categories/low-impact-shaving), as they contain cosmetic clays that add 'slip', to allow a razor to glide over the skin.
-<WRAP center centeralign box 50%>
-<figure>
-![soaps-cutting](https://lowimpactorg.onyx-sites.io/wp-content/uploads/soaps-cutting.jpeg)
-<caption>
-Two machines for cutting the finished soap into bars.
-</caption>
-</figure>
-</WRAP>
-**Making soaps**
-When making soaps, accurate measurement is vitally important - there are various recipes to follow. The process is safe as long as you follow safety precautions when handling caustic soda - i.e. wear safety goggles and gloves, and have some vinegar to hand, to neutralise the alkali in case of spillage.
-You can buy oils, equipment and other ingredients, and you can buy or [make your own essential oils](http://lowimpactorg.onyx-sites.io/categories/essential-oils). You can find local ingredients such as vegetables, herbs, oats, goat's milk or honey, or of course you can produce your own. Some oils can be obtained locally too, such as rapeseed; and to reduce ingredient miles, you can choose European oils such as sunflower, grapeseed and olive rather than tropical oils.
-Getting the combination of oils right is important. For example, although coconut oil is an excellent cleanser, it dries the skin, and so would usually only constitute part of a soap mix.
-<WRAP center centeralign box 50%>
-<figure>
-![soaps-packaging](https://lowimpactorg.onyx-sites.io/wp-content/uploads/soaps-packaging.jpg)
-<caption>
-Ideas for packaging soaps for gifts or for sale.
-</caption>
-</figure>
-</WRAP>
-After the soap-making processes described in 'what are they?' above, pour into moulds and allow to set; take out the next day and cut into bars; then store on a shelf at room temperature, with plenty of ventilation, and allow them to dry out for up to 4 weeks.
-**Selling soaps**
-If you are going to sell your soaps, you need to comply with EU cosmetic legislation, notify Trading Standards and be covered by product liability insurance.
-## Free online course
-Here’s our [free online course](http://lowimpactorg.onyx-sites.io/natural-soaps-course/) on all aspects of making your own natural soaps.
-## Specialist(s)
-[[p:Katrina McKenzie]]
-![](https://lowimpactorg.onyx-sites.io/wp-content/uploads/sarah-harper.jpg)
-[[p:Sarah Harper]]
-[Clovelly Soap Company](http://www.theclovellysoapcompany.com/)